? rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 1 of 5 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2137E- 11/29/07 preliminary electrical characteristics characteristic sym notes min typ max units center frequency f c 869.00 mhz bandwidth, 1db 11 mhz bandwidth, 3db 17 mhz insertion loss within 868 ~ 870 mhz il 2.8 4.0 db amplitude ripple (p-p) 868 ~ 870 mhz 0.2 1.5 absolute attenuation 825~828 mhz 40 47 835~842 mhz 30 39 891~894 mhz 30 42 910~913 mhz 40 47 source impedance z s 50 w load impedance z l 50 w case style sm3030-6 3.0 x 3.0 mm nominal footprint lid symbolization (y=year, ww=week, s=shift) dot=pin 1 indicator 711, ywws standard reel quantity reel size 7 inch 1000 pieces/reel reel size 13 inch 3000 pieces/reel sm3030-6 ? steep roll-off filter for 869.00 mhz unlicensed band ? complies with directive 2002/95/ec (rohs) ? no matching required for operation in 50 w environment absolute maximum ratings rating value units input power level 17 dbm dc voltage 3 v operating temperature range -40 to +85 c storage temperature range -40 to +85 c 869.00 mhz saw filter SF2137E connection terminals port 1 2 port 2 5 case ground all others electrical connections notes: 1. unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 w and measured with 50 w net- work analyzer. 2. unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. rejection is measured as attenuation below the minimum il point in the passband. rejection in final user application is dependent on pcb layout and external impedance matching design. see applica- tion note no. 42 for details. 4. the design, manufacturing process, and specifications of this filter are subject to change. 5. us and international patents may apply. 6. rfm, stylized rfm logo, and rf monolithics, inc. are registered trademarks of rf monolithics, inc. 7. ?copyright 1999, rf monolithics inc. 8. electrostatic sensitive device. observe precautions for handling. pb
869.00 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 2 of 5 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2137E- 11/29/07
869.00 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 3 of 5 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2137E- 11/29/07
869.00 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 4 of 5 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2137E- 11/29/07 tape and reel specifications ?b ? nominal size quantity per reel inches millimeters 7 178 1000 13 330 3000 see detail "a" 13.0 20.2 2.0 12.0 100 ref. "b" ref. component orientation and dimensions carrier tape dimensions ao 3.35 mm bo 3.35 mm ko 1.40 mm pitch 8.0 mm w 12.0 mm ro.3 (max.) ko section a-a 0.3 0.05 section b-b bo 2.0 4.0 ao pitch b b a r0.5 (max.) a 5.5 12.0 1.75 1.5 1.50 pin #1 user direction of feed
869.00 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 5 of 5 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2137E- 11/29/07 sm3030-6 case connection terminals port 1 single ended input 2 port 2 single ended output 5 ground all others single ended operation only dot indicates pin 1 6-terminal ceramic surface-mount case 3.0 x 3.0 mm nominal footprint electrical connections top view bottom view 0.0325 0.029 0.038 0.064 0.0325 0.038 foot print dimensions in nominal inches dimension mm inches min nom max min nom max a 2.87 3.0 3.13 0.113 0.118 0.123 b 2.87 3.0 3.13 0.113 0.118 0.123 c 1.12 1.25 1.38 0.044 0.049 0.054 d 0.77 0.9 1.03 0.030 0.035 0.040 e 2.67 2.80 2.93 0.105 0.110 0.115 f 1.47 1.6 1.73 0.058 0.063 0.068 g 0.72 0.85 0.98 0.028 0.033 0.038 h 1.37 1.5 1.63 0.054 0.059 0.064 i 0.47 0.6 0.73 0.019 0.024 0.029 j 1.17 1.3 1.43 0.046 0.051 0.056 case dimensions 1 2 3 6 5 4 1 2 3 6 5 4 a b c d j e f g h i
|
